Background Image

Snap-on Industrial Catalog CAT1200i : Page-N162

ZEPHYR Bits & Fastener Tools Zephyr Torq-Set ® bits are manufactured using the highest quality high carbon steel and heat treated to exacting standards to provide a maximum amount of torque to the fastener with a minimum of slippage or breakage. Zephyr Torq-Set ® -ACR ® bits provide better “BITE.” With better fit and purchase (surface contact area) they will deliver more torque! Torq-Set ® Insert/Power Bits Torq-Set Insert Bits – 1/4" Hex Shank Model Number ZEPTS212-0 ZEPTS2121 ZEPTS2122 ZEPTS2123 ZEPTS2124 ZEPTS2125 ZEPTS2126 ZEPTS212-8 ZEPTS21210 ZEPTS2121/4 Screw Size 0 1 2 3 4 5 6 8 10 .25 Overall Length 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" Torq-Set Power Bits – 1/4" Hex Shank Model Number ZEPTS1700 ZEPTS1701 ZEPTS1702 ZEPTS1703 ZEPTS1704 ZEPTS1705 ZEPTS1706 ZEPTS1708 ZEPTS17010 Screw Size 0 1 2 3 4 5 6 8 10 Overall Length 1.25" 1.25" 1.25" 1.25" 1.25" 1.25" 1.25" 1.25" 1.25" ZEPTS212-8 ZEPTS170-8 Hi-Torq ® Driver Bits “Hi-Torq” drivers are manufactured using the highest quality, high carbon steel and heat-treated to exacting standards to provide a maximum amount of torque to the fastener with a minimum of slippage or breakage. These bits are designed for high torque fastener installation and removal utilizing a square drive and detent pin drive system. ZEPZHTS-4 Model Number ZEPZHTS1 ZEPZHTS-2 ZEPZHTS-3 ZEPZHTS-4 ZEPZHTS-5 ZEPZHTS-6 ZEPZHTS-7 ZEPZHTS-8 Drive S 1 / 4 " 1 / 4 " 1 / 4 " 1 / 4 " 3 / 8 " 3 / 8 " 1 / 2 " 1 / 2 " ZEPZKLS-2 Recess 1 2 3 4 5 6 7 8 Nom. Screw Size 3, 4, 5, 6 8 10 1 / 4 5 / 16 3 / 8 7 / 16 1 / 2 T .049" .059" .059" .073" .079" .095" .112" .142" D1 .274" .295" .377" .502" .629" .745" .884" .995" D 1 / 2 " 1 / 2 " 1 / 2 " 1 / 2 " 3 / 4 " 3 / 4 " L 1" 1" 1" 1" 1 1 / 4 " 1 1 / 4 " 1 5 / 8 " 1 5 / 8 " Kwik-Lok Temporary Kit 1" 1" Zephyr temporary fasteners are designed to hold multiple pieces of material together temporarily during the assembly process via predrilled, undersize, holes and are designed with the highest quality materials to ensure proper material holding and long life. ZEPZKLS-2 Kit includes: 1 pair of Kwik-Lok Pliers, 10 each temporary fasteners for hole sizes 3/32", 1/8", 5/32", 3/16" and 1/4" with a 0-1/2" grip range. Kit comes in a convenient plastic carrying case. * Conforms to MS33750. ZEPQCK-4040 These tools are designed to install and remove frangible collar (castle nut) style Hi-Lok fasteners. Utilizing a two piece ratcheting tool, socket and pin combina-tion system, they both hold the fastener body in place and rotate the collar to its predetermined torque shear load, breaking off the collar. The removal tools also utilize the two piece ratchet system with a hex pin and a specialized socket containing eccentric rollers which, when rotated in the reverse rotation, cam into the body of the round collar allowing it to be rotated off the fastener body for removal. Frangible Collar Hi-Lok ® Tools Jo-Bolt Blind Fastener Tools ZEP4000KIT These blind fasteners utilize a specialized thread drive pin assembly to tighten and secure the fastened assembly from one side, unlike a pull type or pintail blind fastener. This system uses two types of nose pieces – a flush nose with a taper and indexing groove and a protruding nose, with a standard hex socket configuration. The drivers utilize a two flat drive system and work with both the flush and protruding style noses to install these specialized fasteners. ZEPQCK-4040 Hand installation and Removal Kit includes: Hex Tip Pin sizes 1/16", 5/64", 3/32" and 1/8" Socket Hex sizes 7/32", 1/4", 9/32", 5/16", 11/32", 3/8" and 7/16" Removal Sockets in ranges of .235-.255, .245-.265, .255-.275, .265-.285, .275-.295, .285-.305, .295-.315, .305-.325, .315-.355, .325-.345, .335-.355, .355-.375, .375-.395, and .395-.415 ZEP4000KIT Visu-Lok/Composi-Lok Hand Installation Kit includes: 1 each HW300 Ratchet tool assembly 1 each LFVLG-1 Grip gauge Fastener drivers in sizes -5, -6, -8, -10 and -12 Flush noses in sizes -5, -6, -8, -10 and -12 Reduced flush noses in sizes -5, -6, -8, -10 and -12 Protruding noses in sizes -5, -6, -8, -10 and -12 Millable noses in sizes -5, -6, -8, -10 and -12 Kit comes complete with a durable metal carrying case with a foam insert to hold tools properly in place. N162 www.snapon.com/industrial

Previous Page  Next Page


Publication List
Using a screen reader? Click Here